WP to Twitter 2.2.6 - en to unknown language translation catalogue (196 entries)

en:  Bit.ly User Login Updated.
target: Autentificare utilizator Bit.ly actualizata.

en: (this is NOT the default)
target: (acesta nu este implicit)

en: 1. Register this site as an application on
target: 1. Inregistreaza acest site ca aplicatie pe

en: 2. Copy and paste your consumer key and consumer secret into the fields below
target: 2. Copiaza si lipeste cheie de utlilizator si cheia secreta in campurile de mai jos

en: 200 OK: Success!
target: 200 OK: Succes!

en: 3. Copy and paste your Access Token and Access Token Secret into the fields below
target: 3. Copiaza si lipeste codul de acces si codul de acces secret in campurile de mai jos

en: 400 Bad Request: The request was invalid. This is the status code returned during rate limiting.
target: 400 Bad request: Cererea a fost invalida. Acest mesaj de eroare este returnat in timpul limitarii ratei.

en: 401 Unauthorized: Authentication credentials were missing or incorrect.
target: 401 Unauthorized: Datele de autentificare lipsesc sau sunt incorecte.

en: 403 Forbidden: The request is understood, but it has been refused. This code is used when requests are being denied due to status update character limits.
target: 403 Forbidden: Cererea este inteleasa insa este refuzata. Acest cod este folosit atunci cand cererile sunt refuzate din cauza actualizarii starii limitelor de caractere.

en: 500 Internal Server Error: Something is broken at Twitter.
target: 500 Internal Server Error: Ceva este in neregula la Twitter.

en: 502 Bad Gateway: Twitter is down or being upgraded.
target: 502 Bad Gateway: Twitter este cazut sau este in curs de actualizare.

en: 503 Service Unavailable: The Twitter servers are up, but overloaded with requests Please try again later.
target: 503 Service Unavailable: Serverele Twitter sunt accesibile insa sunt supraincarcate cu cereri. Te rog sa incerci mai tarziu.

en: <abbr title="Uniform Resource Locator">URL</abbr> Shortener Account Settings
target: <abbr title="Uniform Resource Locator">URL</abbr> Setari cont prescurtari

en: <code>#account#</code>: the twitter @reference for the account (or the author, if author settings are enabled and set.)
target: <code>#account#</code>: @referinta twitter pentru cont (sau autor, daca setarile de autor sunt activate si setate.)

en: <code>#author#</code>: the post author
target: <code>#author#</code>: autorul articolului

en: <code>#blog#</code>: the title of your blog
target: <code>#blog#</code>: titlul site-ului

en: <code>#category#</code>: the first selected category for the post
target: <code>#category#</code>: prima categorie selectata pentru articol

en: <code>#date#</code>: the post date
target: <code>#date#</code>: data articolului

en: <code>#post#</code>: a short excerpt of the post content
target: <code> #post# </code>: un fragment scurt a continutului articolului

en: <code>#title#</code>: the title of your blog post
target: <code>#title#</code>: titlul articolului

en: <code>#url#</code>: the post URL
target: <code>#url#</code>: URL-ul articolului

en: <em>Category limits are disabled.</em>
target: <em>Limitarea categoriilor este dezactivata.</em>

en: <em>Saved</em>
target: <em>Salvate</em>

en: <li class="error"><strong>WP to Twitter failed to submit an update to Twitter.</strong></li>
target: <li class="error"> <strong> WP to Twitter nu a reusit sa trimita o actualizare la Twitter. </ strong> </ li>

en: <li class="error"><strong>WP to Twitter was unable to contact your selected URL shortening service.</strong></li>
target: <li class="error"><strong>WP to Twitter nu a putut contacta serviciul de prescurtare URL-uri.</strong></li>

en: <li class="error"><strong>Your server does not appear to support the required methods for WP to Twitter to function.</strong> You can try it anyway - these tests aren't perfect.</li>
target: <li class="error"> <strong> Serverul tau nu pare să sprijine metodele necesare functionarii WP to Twitter </ strong> Puteti incerca oricum -. aceste teste nu sunt perfecte </ li. >

en: <li><strong>WP to Twitter successfully contacted your selected URL shortening service.</strong>  The following link should point to your blog homepage:
target: <strong> WP to Twitter a contactat cu succes serviciul de prescurtare URL-uri </ strong> link-ul urmator ar trebui sa trimita la pagina dvs. de blog:

en: <li><strong>WP to Twitter successfully submitted a status update to Twitter.</strong></li>
target: <strong> WP to Twitter a prezentat cu succes o actualizare a statutului Twitter. </ strong> </ li>

en: <li><strong>Your server should run WP to Twitter successfully.</strong></li>
target: <strong> Serverul ar trebui să ruleze WP to Twitter cu succes. </ strong> </ li>

en: <p>Couldn't locate the settings page.</p>
target: <p>Nu am putut localiza pagina de setari.</p>

en: <p>One or more of your last posts has failed to send it's status update to Twitter. Your Tweet has been saved in your post custom fields, and you can re-Tweet it at your leisure.</p>
target: <p> Unul sau mai multe dintre mesajele dumneavoastra nu a reusit sa actualizeze statutul Twitter. Tweet-ul dvs. a fost salvat inntr-un camp personalizat al articolului pentru a-l putea retrimite. </ p>

en: A Bit.ly API key and username is required to shorten URLs via the Bit.ly API and WP to Twitter.
target: O cheie API Bit.ly si un nume de utilizator sunt necesare pentru a scurta URL-uri prin intermediul API Bit.ly si WP to Twitter.

en: A YOURLS password and username is required to shorten URLs via the remote YOURLS API and WP to Twitter.
target: Un nume de utilizator si o parola YOURLS sunt necesare pentru a scurta URL-uri de la distanta prin intermediul YOURLS API si WP to Twitter.

en: Access Token
target: Cod de acces

en: Access Token
target: Cod de acces

en: Access Token Secret
target: Cod de acces secret

en: Access Token Secret
target: Cod de acces secret

en: Add tags as hashtags on Tweets
target: Adauga etichete la Tweet-uri

en: Advanced Settings
target: Setari Avansate

en: Advanced Tweet settings
target: Setari avansate Twitter

en: Application Type should be set on
target: Tipul aplicatiei trebuie setat la

en: Author
target: Autor

en: Authors can set their username in their user profile. As of version 2.2.0, this feature no longer allows authors to post to their own Twitter accounts. It can only add an @reference to the author. This @reference is placed using the <code>#account#</code> shortcode. (It will pick up the main account if user accounts are not enabled.)
target: Autorii pot seta numele de utilizator in profilul lor de utilizator. Incepand cu versiunea 2.2.0, aceasta caracteristica nu mai permite autorilor de a publica in propriile conturi Twitter. Se poate adauga doar o referinta @ la autor. Aceasta referinta @ este plasata folosind scurtatura <code>#account#</code> . (Acesta va apare in contul principal in cazul in care conturile de utilizator nu sunt activate.)

en: Authors have individual Twitter accounts
target: Autorii au conturi de Twitter individuale

en: Available shortcodes: <code>#url#</code>, <code>#title#</code>, and <code>#description#</code>.
target: Scurtaturi disponibile: <code>#url#</code>, <code>#title#</code>, si <code>#description#</code>.

en: Basic Settings
target: Setari de baza

en: Bit.ly API Key Updated.
target: Cheia API Bit.ly  actualizata.

en: Bit.ly API Key deleted. You cannot use the Bit.ly API without an API key.
target: Cheia API Bit.ly a fost stearsa. Nu poti folosi API-ul Bit.ly fara o cheie API.

en: Bit.ly API Key not added - <a href='http://bit.ly/account/'>get one here</a>! An API key is required to use the Bit.ly URL shortening service.
target: Cheia API Bit.ly nu a fost adaugata - <a href='http://bit.ly/account/'>obtine una de aici</a>! O cheie API este necesara pentru a folosi serviciul de prescurtare URL Bit.ly.

en: Bit.ly Login not added - <a href='http://bit.ly/account/'>get one here</a>!
target: Datele de autentificare Bit.ly nu au fost adaugate - <a href='http://bit.ly/account/'>obtine-le de aici</a>!

en: Bit.ly User Login deleted. You cannot use the Bit.ly API without providing your username.
target: Datele de autentificare la Bit.ly au fost sterse. Nu poti folosi API-ul Bit.ly fara sa furnizezi un username.

en: By default, all posts meeting other requirements will be posted to Twitter. Check this to change your setting.
target: In mod implicit, toate mesajele ce indeplinesc alte cerinte vor fi postate pe Twitter. Verificati acest lucru pentru a schimba setarea.

en: By default, extracted from the post itself. If you use the 'Excerpt' field, that will be used instead.
target: In mod implicit, extrase din articole. Daca utilizati campul "Extras", care va fi folosit in schimb.

en: Category
target: Categorie

en: Category limits unset.
target: Limite categori dezactivate

en: Category limits updated.
target: Limite categorii actualizate.

en: Check Support
target: Verifica suportul

en: Check the categories you want to tweet:
target: Bifeaza categoriile pe care vrei sa le trimiti la Twitter:

en: Check whether your server supports <a href="http://www.joedolson.com/articles/wp-to-twitter/">WP to Twitter's</a> queries to the Twitter and URL shortening APIs. This test will send a status update to Twitter and shorten a URL using your selected methods.
target: Verifica daca serverul tau suporta interogarile <a href="http://www.joedolson.com/articles/wp-to-twitter/">WP to Twitter</a> catre URL-ul Twitter si API-urile de scurtare URL. Acest test va trimite o actualizare de stare catre Twitter si va scurta URL-ul folosind metoda selectata.

en: Choose your short URL service (account settings below)
target: Alege serviciul de prescurtare URL (setarile contului, mai jos)

en: Clear 'WP to Twitter' Error Messages
target: Sterge mesajele de eroare WP to Twitter

en: Clear Bit.ly API Key
target: Sterge cheia API Bit.ly

en: Clear YOURLS password
target: Sterge parola YOURLS

en: Cli.gs API Key deleted. Cli.gs created by WP to Twitter will no longer be associated with your account.
target: Cheia API Cli.gs stearsa. Cli.gs creata de WP to Twitter nu va mai fi asociată cu contul dvs..

en: Cli.gs API Key not added - <a href='http://cli.gs/user/api/'>get one here</a>!
target: Cheia API Cli.gs nu a fost adaugata - <a href='http://cli.gs/user/api/'>obtine una de aici</a>!

en: Cligs API Key Updated
target: Cheia API Cligs actualizata

en: Connect to Twitter
target: Conecteaza la Twitter

en: Consumer Key
target: Cheie utilizator

en: Consumer Secret
target: Secret utilizator

en: Custom field for an alternate URL to be shortened and Tweeted:
target: Camp personalizat pentru un URL alternativ ce urmeaza a fi prescurtat si trimis la Twitter:

en: Custom text after all Tweets:
target: Text personalizat dupa fiecare Tweet:

en: Custom text before all Tweets:
target: Text personalizat inainte de toate Tweet-urile:

en: Default Access type must be set to
target: Tipul de acces implicit trebuie sa fie setat la

en: Default is from your general settings. <a href='http://codex.wordpress.org/Formatting_Date_and_Time'>Date Formatting Documentation</a>.
target: Implicit este din setarile generale. <a href='http://codex.wordpress.org/Formatting_Date_and_Time'>Documentatie formatare data</a>.

en: Default replacement is an underscore (<code>_</code>). Use <code>[ ]</code> to remove spaces entirely.
target: Inlocuirea implicita este underscore (<code>_</code>). Foloseste <code>[ ]</code> pentru a inlatura spatiile in intregime.

en: Disable Error Messages
target: Dezactiveaza mesajele de eroare

en: Disable global Twitter API error messages.
target: Dezactiveaza mesajele globale de eroare API ale Twitter.

en: Disable global URL shortener error messages.
target: Dezactiveaza

en: Disable notification to implement OAuth
target: Dezactiveaza notificarile pentru a implementa OAuth

en: Disconnect Your WordPress and Twitter Account
target: Deconecteaza conturile Wordpress si Twitter

en: Disconnect from Twitter
target: Deconecteaza de la Twitter

en: Do not post status updates by default
target: Nu publica actualizarea starii ca implicit

en: Don't Tweet this post.
target: Nu trimite acest articol la Twitter

en: Don't have a Cli.gs account or Cligs API key? <a href='http://cli.gs/user/api/'>Get one free here</a>!<br />You'll need an API key in order to associate the Cligs you create with your Cligs account.
target: Nu ai un cont Cli.gs sau cheie API Cligs? <a href='http://cli.gs/user/api/'>Obtine una gratuit de aici</a>!<br />Vei avea nevoie de o cheie API.

en: Don't shorten URLs.
target: Nu prescurta URL-urile.

en: Enter your own Twitter username.
target: Introdu username-ul Twitter personal.

en: Example:
target: Exemplu:

en: Export Settings
target: Exporta setarile

en: Failed to save your YOURLS password!
target: Nu am reusit sa salvez parola YOURLS!

en: Get Debugging Data for OAuth Connection
target: Obtine date de depanare pentru conexiunea OAuth

en: Get Support
target: Solicita suport

en: Google Analytics Settings
target: Setari Google Analytics

en: I'm using a plugin to post by email, such as Postie. Only check this if your updates do not work.
target: Folosesc un plugin pentru a publica prin email cum ar fi Postie. Bifeaza doar daca actualizarile nu functioneaza.

en: If you're not currently logged in, use the Twitter username and password which you want associated with this site
target: Daca nu sunteti conectat in prezent, folositi numele de utilizator si parola Twitter pe care doriti sa le asociati cu acest site

en: Individual Authors
target: Autori individuali

en: Length of post excerpt (in characters):
target: Marime rezumat articol (in caractere):

en: Limit Updating Categories
target: Limiteaza actualizarea categoriilor

en: Make a Donation
target: Fa o donatie

en: Maximum length in characters for included tags:
target: Numarul maxim de caractere pentru etichetele incluse:

en: Maximum number of tags to include:
target: Numarul maxim de etichete pentru a fi incluse:

en: No error information is available for your shortener.
target: Nu exista informatii despre erori pentru prescurtarea URL-urilor.

en: OAuth Authentication Data Cleared.
target: Datele de autentificare OAuth au fost sterse.

en: OAuth Authentication Failed. Check your credentials and verify that <a href="http://www.twitter.com/">Twitter</a> is running.
target: Autentificarea OAuth a esuat. Verifica cheile si asigura-te ca ai acces la <a href="http://www.twitter.com/">Twitter</a>

en: OAuth Authentication response not understood.
target: Raspuns de autentificare de la OAuth necunoscut.

en: On the right hand side of your new application page at Twitter, click on 'My Access Token'.
target: In bara lateral dreapta din pagina aplicatiei Twitter, apasa pe My access Token.

en: Once you have registered your site as an application, you will be provided with a consumer key and a consumer secret.
target: Odata inregistrat site-ul ca aplicatie, vei primi o cheie de utilizare si o cheie secreta.

en: Path to the YOURLS config file (Local installations)
target: Calea catre fisierul de configurare YOURLS (Instalare locala)

en: Post ID
target: ID articol

en: Post Title
target: Titlu articol

en: Read &amp; Write
target: Citire &amp; Scriere

en: Save Advanced WP->Twitter Options
target: Salveaza WP avansat -> Optiuni Twitter

en: Save Bit.ly API Key
target: Salveaza cheia API Bit.ly

en: Save WP->Twitter Options
target: Salveaza WP->Optiuni Twitter

en: Save YOURLS Account Info
target: Salveaza informatiile despre contul YOURLS

en: Select which blog categories will be Tweeted.
target: Selecteaza categoriile blog-ului ce vor fi trimise la Twitter.

en: Send Twitter Updates on remote publication (Post by Email or XMLRPC Client)
target: Trimite actualizarile Twitter prin publicare de la distanta (Publicare prin Email sau client XMLRPC)

en: Set Categories
target: Seteaza categoriile

en: Settings
target: Setari

en: Shortcodes available in post update templates:
target: Scurtaturi disponibile in sabloanele de actualizari articole:

en: Sorry! I couldn't get in touch with the Twitter servers to post your <strong>new link</strong>! You'll have to post it manually, I'm afraid.
target: Ne pare rău! Nu am putut lua legătura cu serverele Twitter pentru a publica<strong> noul link </ strong>! Va trebui să-l publicati manual!

en: Sorry! I couldn't get in touch with the Twitter servers to post your new blog post. Your tweet has been stored in a custom field attached to the post, so you can Tweet it manually if you wish!
target: Imi pare rau! Nu am putut contacta serverele Twitter pentru a publica noul tau articol. Tweet-ul tau a fost stocat intr-un camp personalizat atasat la articol prin urmare poti publica Tweet-ul manual daca doresti!

en: Spaces replaced with:
target: Spatiile inlocuite cu:

en: Special Cases when WordPress should send a Tweet
target: Cazuri speciale cand WordPress ar trebui sa trimita un Tweet

en: Static Campaign identifier for Google Analytics:
target: Campanie identificator static pentru Google Analytics:

en: Text for editing updates:
target: Text pentru actualziarea editarilor:

en: Text for new link updates:
target: Textul pentru actualizarea link-urilor noi:

en: Text for new page updates:
target: Textul pentru actualizarea noilor pagini:

en: Text for new post updates:
target: Textul pentru actualizarea noilor articole:

en: Text for page edit updates:
target: Text pentru actualizarea paginilor editate:

en: The Callback URL should be
target: URL-ul pentru raspuns ar trebui sa fie

en: The path to your YOURLS installation is not correct.
target: Calea catre instalarea YOURLS nu este corecta.

en: The process to set up OAuth authentication for your web site is needlessly laborious. It is also confusing. However, this is the only method available from Twitter at this time. Note that you will not, at any time, enter you Twitter username or password into WP to Twitter; they are not used in OAuth authentication.
target: Procesul pentru a configura autentificarea OAuth pentru site-ul dvs. este inutil de laborios. Este de asemenea confuz. Cu toate acestea, este singura metodă disponibilă de la Twitter in acest moment. Retineti ca nu veti introduce niciodata numele de utilizator sau parola in WP to Twitter, ele nu sunt utilizate în autentificarea OAuth.

en: These options allow you to restrict the length and number of WordPress tags sent to Twitter as hashtags. Set to <code>0</code> or leave blank to allow any and all tags.
target: Aceste optiuni va permit sa limitati durata si numarul de etichete WordPress trimise la Twitter ca hashtags. Setati la <code> 0 </ code> sau lasati necompletat pentru a permite orice sau toate etichetele.

en: This URL is direct and has not been shortened:
target: Acesta este un URL direct, nu a fost scurtat:

en: Tweet Templates
target: Sabloane Twitter

en: Tweet my posts with an @ reference to both my username and to the main site username.
target: Trimite articolele cu un @ atat in fata username-ului cat si in fata username-ului site-ului principal.

en: Tweet my posts with an @ reference to my username.
target: Trimite articolele cu un @ in username.

en: Twitter Consumer Key
target: Cheie utilizator Twitter

en: Twitter Consumer Secret
target: Secret utilizator Twitter

en: Twitter Username
target: Username Twitter

en: Twitter now requires authentication by OAuth. You will need you to update your <a href="%s">settings</a> in order to continue to use WP to Twitter.
target: Twiter solicita autentificarea prin OAuth. Va trebui sa-ti actualizezi <a href="%s">setarile</a> pentru a continua sa utilizezi WP to Twitter.

en: Twitter's application registration page
target: Pagina de inregistrare a aplicatiei Twitter

en: URI to the YOURLS API (Remote installations)
target: URI catre API-ul YOURLS (Instalari la distanta)

en: Update Twitter when WordPress Pages are edited
target: Actualizeaza Twitter atunci cand sunt editate paginile WordPress

en: Update Twitter when a post is published using QuickPress
target: Actualizeaza Twitter cand este publicat un articol folosind QuickPress

en: Update Twitter when new Wordpress Pages are published
target: Actualizeaza Twitter atunci cand sunt publicate pagini noi WordPress

en: Update Twitter when you post a Blogroll link
target: Actualizeaza Twitter cand postezi un nou link pe BlogRoll

en: Update when a post is edited
target: Actualizeaza atunci cand un articol a fost editat

en: Update when a post is published
target: Actualizeaza atunci cand este publicat un articol nou

en: Updates Twitter when you create a new blog post or add to your blogroll using Cli.gs. With a Cli.gs API key, creates a clig in your Cli.gs account with the name of your post as the title.
target: Actualizeaza Twitter atunci cand creezi un articol nou sau adaugi legaturi noi folosind Cli.gs. Cu o cheie API Cli.gs, creeaza un Clig in contul tau Cli.gs cu numele articolului ca titlu.

en: Use Bit.ly for my URL shortener.
target: Use Bit.ly pentru prescurtarea URL-ului

en: Use Cli.gs for my URL shortener.
target: Foloseste Cli.gs pentru scurtarea URL-urilor

en: Use My Twitter Username
target: Foloseste username-ul meu Twitter

en: Use Post ID for YOURLS url slug.
target: Foloseste ID articol pentru slug-ul URL al YOURLS

en: Use WordPress as a URL shortener.
target: Foloseste WordPress pentru a prescurta URL-urile.

en: Use a Static Identifier with WP-to-Twitter
target: Foloseste un identificator static cu WP to Twitter

en: Use a dynamic identifier with Google Analytics and WP-to-Twitter
target: Folositi un identificator dinamic cu Google Analytics si WP to Twitter

en: Using WordPress as a URL shortener will send URLs to Twitter in the default URL format for WordPress: <code>http://domain.com/wpdir/?p=123</code>. Google Analytics is not available when using WordPress shortened URLs.
target: Folosind wordpress pentru prescurtarea URL-urilor va trimite URL-urile catre Twitter in formatul implicit pentru Wordpress: <code>http://domain.com/wpdir/?p=123</code>. Google Analytics nu este disponibil atunci cand folosesti prescurtarile WordPress.

en: WP to Twitter Advanced Options Updated
target: Optiuni avansate WP to Twitter actualizate

en: WP to Twitter Date Formatting:
target: Formatare data WP to Twitter:

en: WP to Twitter Errors Cleared
target: Erorile WP to Twitter au fost sterse

en: WP to Twitter Options
target: Optiuni WP to Twitter

en: WP to Twitter Options Updated
target: Optiuni WP to Twitter actualizate

en: WP to Twitter User Settings
target: Setari utilizatori pentru WP to Twitter

en: WP to Twitter is now connected with Twitter.
target: WP to Twitter este conectat acum la Twitter.

en: What dynamic identifier would you like to use?
target: Ce identificator dinamic doresti sa folosesti?

en: YOURLS (installed on a remote server)
target: YOURLS (instalat pe un server remote)

en: YOURLS (installed on this server)
target: YOURLS (instalat pe acest server)

en: YOURLS API url added.
target: URL-ul API pentru YOURLS adaugat.

en: YOURLS API url removed.
target: URL-ul API pentru YOURLS sters.

en: YOURLS local server path added.
target: Calea locala YOURLS de pe server a fost adaugata

en: YOURLS local server path removed.
target: Calea locala YOURLS de pe server a fost stearsa.

en: YOURLS password deleted. You will be unable to use your remote YOURLS account to create short URLS.
target: Parola YOURLS stearsa. Nu vei putea folosi contul YOURLS pentru a creea URL-uri scurte.

en: YOURLS password updated.
target: Parola YOURLS actualizata.

en: YOURLS username added.
target: Username-ul YOURLS a fost adaugat.

en: YOURLS will not use Post ID for the short URL slug.
target: YOURLS nu va folosi ID-ul articolului pentru slug-urile URL-urilor scurte.

en: YOURLS will use Post ID for short URL slug.
target: YOURLS va folosi ID-ul articolului pentru slug-ul URL-ului scurt

en: You can also create custom shortcodes to access WordPress custom fields. Use doubled square brackets surrounding the name of your custom field to add the value of that custom field to your status update. Example: <code>[[custom_field]]</code></p>
target: Puteti crea de asemenea scurtaturi personalizate pentru a accesa campuri personalizate WordPress. Utilizati paranteze drepte duble in jurul numelui campului dumneavoastra particularizat pentru a adauga valoarea campului particularizat la actualizarea starii. Exemplu: <code>[[custom_field]]</code></p>

en: You can not disable updates on edits when using Postie or similar plugins.
target: Nu puteti dezactiva actualizarile dupa editare daca folosesti plugin-uri gen Postie.

en: You can track the response from Twitter using Google Analytics by defining a campaign identifier here. You can either define a static identifier or a dynamic identifier. Static identifiers don't change from post to post; dynamic identifiers are derived from information relevant to the specific post. Dynamic identifiers will allow you to break down your statistics by an additional variable.
target: Puteti urmari raspunsurile de la Twitter folosind Google Analytics, prin definirea unei campanii de identificare. Puteti defini fie un identificator static sau unul dinamic. Identificatorii statici nu se schimba de la articol la articol; identificatorii dinamici sunt derivati din informatiile relevante pentru articole specifice. Identificatorii dinamici va permit sa descompuneti statisticile dvs. printr-o variabila suplimentara.

en: You can use a custom field to send an alternate URL for your post. The value is the name of a custom field containing your external URL.
target: Aveti posibilitatea sa utilizati un camp particularizat pentru a trimite un URL alternativ pentru articolul tau. Valoarea este numele unui camp particularizat care contine URL-ul extern.

en: You have not connected WordPress to Twitter.
target: Nu ai conectat WordPress la Twitter.

en: You must add your Bit.ly login and API key in order to shorten URLs with Bit.ly.
target: Trebuie sa adaugati datele de conectare si cheia API Bit.ly pentru a prescurta URL-uri cu Bit.ly.

en: You must add your YOURLS remote URL, login, and password in order to shorten URLs with a remote installation of YOURLS.
target: Trebuie sa adaugati URL-ul dvs. YOURLS la distanţă, utilizatorul şi parola pentru a scurta URL-uri cu o instalare de la distanţă de YOURLS.

en: You must add your YOURLS server path in order to shorten URLs with a remote installation of YOURLS.
target: Trebuie sa adaugi calea ta YOURLS de pe server, cu scopul de a scurta URL-uri cu o instalare de la distantă de YOURLS.

en: Your Application Description can be whatever you want.
target: Descrierea aplicatiei poate fi oricare

en: Your Application's Name will be what shows up after "via" in your twitter stream; previously, "WP to Twitter." Your application name cannot include the word "Twitter." I suggest using the name of your web site.
target: Numele aplicatiei dvs. va apare dupa "via"  in fluxul Twitter; anterior, "WP to Twitter." Numele aplicatiei nu poate include cuvantul "Twitter." Iti sugeram sa utilizati numele site-ului dvs.

en: Your Bit.ly <abbr title='application programming interface'>API</abbr> Key:
target: Cheia Bit.ly <abbr title='application programming interface'>API</abbr> :

en: Your Bit.ly account details
target: Detaliile contului tau Bit.ly

en: Your Bit.ly username:
target: Username-ul Bit.ty:

en: Your Cli.gs <abbr title='application programming interface'>API</abbr> Key:
target: Cheia Cli.gs <abbr title='application programming interface'>API</abbr> :

en: Your Cli.gs account details
target: Detaliile contului tau Cli.gs

en: Your YOURLS account details
target: Detaliile contului tau YOURLS

en: Your YOURLS password:
target: Parola ta YOURLS:

en: Your YOURLS username:
target: Username-ul tau YOURLS:

en: [<a href='options-general.php?page=wp-to-twitter/wp-to-twitter.php'>Hide</a>] If you're experiencing trouble, please copy these settings into any request for support.
target: [<a href='options-general.php?page=wp-to-twitter/wp-to-twitter.php'>Ascunde</a>] Daca intampini probleme, te rog sa copiezi aceste setari in orice cerere pentru suport.
